Accessibility Games News Forums Games News Forums

F1® 22

for Steam

Accessibility Resources

Accessibility Options

Assists

Audio

Camera Customization

Car and Track Selection

Career Settings

Choose Your Race Style

Control Calibration

Controls

Custom Championship Track Select

EA Music

Game Options

Graphics Settings

Lobby Options

On-Screen

Rules and Flags

Simulation Settings

Telemetry Settings

Time Trial Settings

Tobii Eye Tracking

Vibration & Force Feedback

Video Mode

Weather and Time of Day

Weekend Structure

Control Calibration

Note: This menu can be found in the Wireless Controller Preset menu within Controls settings.
This image shows all of the Calibration menu settings below.

Steering Deadzone

Adjust the slider to change the amount of steering movement needed to register any input. This option has a value range of 0 to 100. The default is set to 0.  A large deadzone will mean there is a large amount of initial rotation needed before it is detected as a steering input.

Steering Linearity

Adjust the slider to change the amount of difference in sensitivity between the centre point and the remainder of wheel rotation. This option has a value range of 0 to 100. The default is set to 0. A higher linearity value will make the centre point position far less sensitive than the far left and far right extents of rotation.

Steering Saturation

Adjust the slider to change the how much rotation is considered maximum lock and scales appropriately. This option has a value range of 0 to 100. The default I set to 0. An increased saturation represents an increase in sensitivity.

Throttle Deadzone

Adjust the slider to change the amount of throttle movement needed to register any input. This option has a value range of 0 to 100. The default is set to 0.  A large deadzone will mean there is a large amount of initial pedal movement is needed before it is detected as throttle input.

Throttle Linearity

Adjust the slider to change the amount of difference in sensitivity between the starting point and the remainder of the throttle pedal. This option has a value range of 0 to 100. The default is set to 0. A higher linearity value will make the initial pedal travel less sensitive than the final piece of pedal travel.

Throttle Saturation

Adjust the slider to change when the accelerator pedal is considered maximum input. This option has a value range of 0 to 100. The default is set to 0. Increasing the throttle saturation will raise the pedal’s sensitivity level. 

Brake Deadzone

Adjust the slider to change the amount of brake movement needed to register any input. This option has a value range of 0 to 100. The default is set to 0.  A large deadzone will mean there is a large amount of initial pedal needed before it is detected as a braking input.

Brake Linearity

Adjust the slider to change the amount of difference in sensitivity between the starting point and the remainder of the brake pedal. This option has a value range of 0 to 100. The default is set to 0. A higher linearity value will make the initial compression less sensitive than the final piece of pedal travel.

Brake Saturation

Adjust the slider to change when the brake pedal is considered maximum input. This option has a value range of 0 to 100. The default is set to 0. Increasing the brake pedal saturation will raise the pedal’s sensitivity level.